Long ad

Come and See!

Translate

Wednesday, October 29, 2014

Reversible pumpkin craft [recycled]



Materials Used:
  1. 2 orange paints
  2. 1 yellow paint
  3. 1 black paint
  4. brushes
  5. green paper strips
  6. Freschetta pizza cardboard circle [but can cut your own circle if you don't have this]
  7. (if making the pirate) tissue box opening cardboard piece (eye patch) [but you can cut your own shape if you don't have this]
  8. white cardstock [can use yellow or black paper though if you have it--less painting=easier]
  9. Scissors, newspaper (to lay down)
  10. hot glue or elmers glue
  11. ribbon for hanging
  12. suction cup hook (for hanging on window) see them here: Super colorful suction hooks (48 for $5.50)

 1 

Cut out two large triangle and two smaller triangles to fit inside the bigger two
 (if using colored paper already, cut out two large black triangles and two smaller yellow triangles to fit inside) and cut a large and small triangle shape for your nose as well!

NOTE: IF MAKING THE PIRATE YO WILL ONLY NEED 4 TOTAL TRIANGLES: TWO FOR THE EYE AND TWO FOR THE NOSE. WILL NEED TO CUT A PIECE FOR THE EYE PATCH AND STRAPS.

 2 
Paint your big triangles black (will give the glowing eyes and nice border when done)
paint your smaller triangles yellow

 3 
cut an imperfect mouth shape (if using colored paper cut it from the yellow paper)

 4 

then cut out a slightly larger one by placing your cut out on top of another piece of your paper (if using colored paper, place yellow cutout on top of black paper and cut around the yellow one to make a slightly larger mouth outline)

 5 
paint your bigger mouth black and the smaller one yellow (if making the pirate paint your eye patch and cut strips to be the strap and paint)...and let all that is painted dry completely.

 6 
Glue on your facial features & stem and leaves. I mirrored where I put the stem on the first pumpkin i made so that it created one stem and looked 'right' from both sides (as you can see only one stem in the picture below). *Glue on ribbon ends in between the two sided stem.



7

What I love about this is that if you choose to hang yours in a window, one face can always be seen from the inside and one from the outside!

If you choose to hang it on a wall or a door, you can switch the face that you want to show whenever you'd like. Kind of fun, huh!?

What do you think!!?

Pin It!

DIY Cat Ears!



1.   Materials Needed: Hot glue gun, Black felt, Pink thing foam sheet (or felt...I had foam so that is what I used), two hair clips, scissors.
2.   Cut out the shape and size ears you want from your black felt. Cut out a shape to go inside of your black ear, from the pink foam (or felt) leaving a good amount of black to still be seen behind it [this is the inner ear].
LINE THEM UP AND SNIP A SMALL LINE AT THE BOTTOM center (with them together)--this is where they will be crisscrossed to make them 'POP' out.
3.   Crisscross them/bend the flaps over each other to see how you want them glued. Then glue the black felt ear first. ONE FLAP OVER THE OTHER--WHERE IT WAS SNIPPED. Should give you that cone shape when you flip it over.
4.   Hot glue the flaps of the pink one next. ONE FLAP OVER THE OTHER--WHERE IT WAS SNIPPED. Should give you that cone shape when you flip it over.  glue the pink inside the black one.
5.     Cut a piece of black felt to cover your hair clip. DOESN'T have to look perfect (because it’s not noticeable once in your hair (at least not if you have dark hair like mine and are making dark ears) hot glue it over your clip--(make a little longer on the ends so that your clips tips don’t show, if your clip is lighter colored like mine is)
6.    Then round off the end of your 'almost finished' ears by taking scissors to scallop the end (compare picture 4 to picture 6) without cutting too close to the glued fold. Then hot glue on your clip!


NOW GO PUT YOUR CAT EARS & MAKE UP ON AND YOU ARE READY TO GO!
Pin It!

Tuesday, October 28, 2014

DRY ERASE changeable holiday decor


I Was inspired by this image...

and I look forward to doing more of this throughout the year for other holidays!

How fun, right!?

Pin It!

Monday, October 20, 2014

Krispy Kreme – Free Halloween Doughnut on 10/31

Krispy Kreme – Free Halloween Doughnut on 10/31

Yum! Get a free Halloween Doughnut at Krispy Kreme when you visit a participating  location on 10/31 dressed in costume. Valid on choice of  FREE Halloween Doughnut. Offer good for one doughnut per customer No purchase necessary.
On October 31st, come in in your costume and get one free doughnut of your choice (including the Ghostbusters doughnuts) at any participating Krispy Kreme US and Canadian location. Offer good on October 31st only. No purchase necessary. While supplies last
Pin It!

Friday, October 17, 2014

My Favorite FREE 'Fall' Printables


Aren't these just wonderful!? 

These are my favorites that I have seen for this year. Here are the links to find your favorites prints:T

note: the black actually (link) has the white print and the white has the black print! (dont be confused!, I was)













Pin It!

Favorite EASY Halloween Wreaths










 Candy CORN WREATH

Green frame with web: Couldn't find the link to the picture sadly, but it doesn't look too hard to fig out!
Berries/candy corn 31: Link was disabled as well, but from the lilluna blog.
Pin It!

Milk Jug Lanterns



Materials used:
Rinsed and dried Gallon milk jug
paints: orange, yellow, brown
paint or foam brush(es)
black sharpy
red tape (mine was a translucent one i had lying around, but any will do) OR red sharpy!
hot glue (could use elmers too, just longer to dry)
1-2 green pipe cleanerS (I think i used 2...)
purple glitter glue
sharp pairing or steak knife
candle or LED light
possibly: some rocks (for weight)


First Step:
After your jug has dried, cut through the top of the container, just lower than the top of the handle. *Would suggest cutting from the front of the jug towards the back...being sure to keep some plastic intact so that you can still have that handle be functional! BUT the part of the handle that shows from the front is also your STEM, so do not cut an even line all the way around the top!

Make sure your hot glue gun is plugged in, to get it ready...

Second Step:
Next, draw on everything you want to with your black sharpy that you can (first: jack-o-lantern face, spider web & spidey, little bat...) and put red tape to spell BEWARE, the hour glass on the black widow (or red sharpy if that's what you choose).

Then you can paint inside the pumpkins facial features yellow, and the head orange. Paint the big circle Yellow (moon!), and the stem orange.

Trace the moon and the beware with your black sharpy to help it stand out a bit.

Third Step:

Let Dry.......
Can now draw the ghost behind your BEWARE.

Now, Hot glue right over your spider web lines (gives it a bit of texture and a 2D effect, I thought)
Wrap your green pipe cleaners around the stem in any way you like. I twisted and curled mine a bit to give it a vine-look.


   You are done!   

Just put in your light/candle and any weights (rocks) around the light to keep it grounded (if not so great weather were to come around) 




Pin It!
Related Posts Plugin for WordPress, Blogger...

ad 1